Thời gian làm việc
Thứ 2->6 : 8:00 - 21:00
Thứ 7,CN : 9:00 - 20:00
Hỗ trợ trực tuyến
Bán lẻ: Mr. Hoàng
Skype Me™!
Hotline:0965322232

Quản lí: Mr.Hiền
Skype Me™!
Hotline:0934 88 83 86

Danh mục sản phẩm
Sản phẩm bán chạy
M95
190.000 VNĐ
Jlink-Horse
130.000 VNĐ
LM2596 Module V1
35.000 VNĐ
BL4.0 HM11 - SMD
249.000 VNĐ
BL2.0 HC06 -DIP(Slave)
145.000 VNĐ
nRF24L01 Module V1
45.000 VNĐ
Sản phẩm xem nhiều
STM32F103 EDU KIT

1.800.000 VNĐ
1.710.000 VNĐ
Burn-E Progammer

200.000 VNĐ
ESP8266

68.000 VNĐ
Mạch nạp PICKIT2

180.000 VNĐ
BL2.0 HC06 -DIP(Slave)

145.000 VNĐ
STM32F103C8 Mini KIT

230.000 VNĐ
STM32F4 Discovery

435.000 VNĐ

J-LINK V8 Emulator

Hãng sản xuất: China
Mã sản phẩm: VNT0128
Trạng thái: Còn hàng:2
Nhóm sản phẩm: Mạch Nạp ARM
Xuất xứ: Trung Quốc
Kiểu chân:
Số chân: 0
Đơn vị tính:
Giá:
265.000 VNĐ

Giá trước thuế: 265.000 VNĐ
Bảng giá theo số lượng
Số lượng 5 - 9 10 - 49 50 - 199 200 trở lên
Giá 260.000 VNĐ 255.000 VNĐ 250.000 VNĐ Liên hệ
Số lượng: -
+
đánh giá  0 nhận xét  |  2176 lượt xem  |  Viết đánh giá

J-LINK V8 support ARM7, ARM9, ARM11, Cortex-M3 core, support ADS, IAR, KEIL development environment.
1. JLINK full function emulator-the 09 new chip;
2. Authentic original double core output buffer(double BUFFER)
Philips original 74 alvc164245dggr
3. JLink USB port esd protection IC full protection!
4. The 500 ma self recovery fuse to protect our USB mouth, full protection!
5. The JLink use 1.5 A large current 8550 triode, ensure that power on command can output 400 ma current!
Your products can be directly by JLINK power supply, and simulation is very convenient!!!!!!!!!!
6. All machine SMT processing, quality assurance!
V8.0 version relative V7.0 version of the improvement:
(1) improve the SWD hardware interface circuit, fake JLINK V8 use JTAG debug mode can be normal debug, but when debugging CORTEX - M3 kernel chip will not be able to use SWD function. V7 hardware SWD part with V8, if forced switch to SWD way, JLINK main control chip will be destroyed! JLINK V8 interface circuit adopts two pieces of level conversion chip, using a piece of level conversion chip is fake V8!
(2) V8.0 use bi-color LED can be instructed to more work state, V7.0 only one LED lamp;
(3) to optimize the firmware structure, will the firmware upgrade function moved to bootloader area, make application area to expand a times, easy to add new functions;
(4) for ARM11 support better, faster than JLINK V7, ARM11 is preferred.
Product introduction
J-Link is SEGGER company to support simulation ARM kernel chip launched JTAG emulator. Cooperate with IAR EWARM, ADS, KEIL, WINARM, such as RealView integrated development environment support all ARM7 / ARM9 core chip simulation, through the RDI interface and the integrated development environment seamless connection, convenient operation, joins convenient, easy to operate, is the study development ARM best the most practical development tools.
J-Link ARM main features:
1. IAR EWARM integrated development environment seamless connection of JTAG emulator
2. support all ARM7/ARM9 core chip, and cortex M3, including Thumb mode
3. support ADS, IAR, KEIL, WINARM, REALVIEW etc almost all of the development environment
4. download speed up to ARM7:600 kB/s, ARM9:550 kB/s, through the DCC highest can amount to 800 kB/s
5. the highest JTAG speed 12 MHz
6. target plate voltage range 1.2 V, 3.3 V, 5 V compatible
7. automatic speed identification function
8. monitoring all JTAG signal and target plate voltage
9. completely plug and play
10. use USB power supply (but not target plate power supply)
11. USB cable and 20 core flat cable
12. supports multiple JTAG device serial connection
13. standard 20 core JTAG simulation plug
14. matching and core JTAG simulation plug
15. optional for 5 v target plate adapter
16. J-Link TCP/IP server, allowing through the TCP/IP network use J - Link
J-Link support ARM kernel:
1. ARM7TDMI (Rev 1)
2. ARM7TDMI (Rev 3)
3. ARM7TDMI - S (Rev 4)
4.ARM720T&ARM920T
5.ARM926EJ-S
6..ARM946E-S
7.ARM966E-S,
8. ARM11
9..Cortex-M3
And original V8 circuit principle the same
And the same original V8 device parameters
Original firmware, not DIY firmware
Choose brand manufacturers components
Machine, the welding is reliable, the outward appearance is exquisite
 
Product specifications
 
USB power supply, the current < 50 ma
USB interface USB 2.0 at full speed 12 MBPS
Target plate interface
JTAG (20 p)
J - Link and target plate between the serial data transfer speed maximum 12 MHZ
Support the target plate voltage of 1.2-3.3V, 5V compatible
Target plate power supply voltage of 4.5 -- 5v (by USB provide 5v)
Target plate power supply current maximum 300 ma, has the over-current protection function
Working environment temperature + 5C... + 60C
Storage temperature - 20C... + 65C
Humidity < 90%
Size (excluding cable)100mm x 53 mmx27mm
Weight (excluding cable) 70g
Electromagnetic compatibility EN 55022, EN 55024
 
Support of the operating system
Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
 
Shipping list:
1. A J-LINK V8 emulator
2. A Pure copper shield USB cable
3. A Standard 20 pin simulation exhaust line

Viết đánh giá cho sản phẩm




Sản phẩm liên quan
149.000 VNĐ
115.000 VNĐ
180.000 VNĐ